Hitachi ZX170W-5A Скачать руководство пользователя страница 13

Страница: 13 / 61

SAFETY

SA-7

Ensure Safety Before Rising from or Leaving

Operator’s Seat



Before rising from the operator’s seat to open/close either

side window or to adjust the seat position, be sure to first

lower the front attachment to the ground and then move

the pilot control shut-off lever to the LOCK position, and put

the brake switch in the P (parking brake) position. Failure to

do so may allow the machine to unexpectedly move when

a body part unintentionally comes in contact with a control

lever and/or pedal, possibly resulting in serious personal

injury or death.



Before leaving the machine, be sure to first lower the front

attachment to the ground and then move the pilot control

shut-off lever to the LOCK position, and put the brake

switch in the P (parking brake) position. Turn the key switch

OFF to stop the engine.



Before leaving the machine, close all windows, doors, and

access covers and lock them.

Fasten Your Seat Belt



If the machine should overturn, the operator may become

injured and/or thrown from the cab. Additionally the

operator may be crushed by the overturning machine,

resulting in serious injury or death.



Prior to operating the machine, thoroughly examine

webbing, buckle and attaching hardware. If any item is

damaged or worn, replace the seat belt or component

before operating the machine.



Be sure to remain seated with the seat belt securely

fastened at all times when the machine is in operation to

minimize the chance of injury from an accident.



We recommend that the seat belt be replaced every three

years regardless of its apparent condition.

SA-237

WLBJE0-EN-00

Содержание ZX170W-5A






























































Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды

Hitachi ZX170W-5A, Руководство по ремонту

Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды