Hitachi ZX170W-5A Скачать руководство пользователя страница 33

Страница: 33 / 61

SAFETY

SA-27

SA-034

Avoid Injury from Attachment Falling Accident



Stored attachments such as buckets, hydraulic hammers,

and blades can fall and cause serious injury or death.



To avoid possible personal injury from attachment falling

accident, use a platform when replacing an attachment.



Securely store attachments and implements to prevent

falling.



Keep children and bystanders away from attachment

storage areas.

Support Maintenance Properly



Explosive separation of a tire and rim parts can cause

serious injury or death.



Do not attempt to mount a tire unless you have the

proper equipment and experience to perform the job.

Have it done by your authorized dealer or a qualified

repair service.



Always maintain the correct tire pressure. DO NOT inflate

tire above the recommended pressure.



When inflating tires, use a chip-on chuck and extension

hose long enough to allow you to stand to one side and

not in front of or over the tire assembly. Use a safety cage

if available.



Inspect tires and wheels daily. Do not operate with low

pressure, cuts bubbles, damaged rims, or missing lug

bolts and nuts.



Never cut or weld on an inflated tire or rim assembly. Heat

from welding could cause an increase in pressure and

may result in tire explosion.

SA-249

WLBJE0-EN-00

Содержание ZX170W-5A






























































Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды

Hitachi ZX170W-5A, Руководство по ремонту

Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды