Hitachi ZX170W-5A Скачать руководство пользователя страница 55

Страница: 55 / 61

Group 1 Precautions for Disassembling and Assembling

SECTION 1 GENERAL

W1-1-1-3

Precautions for Using Nylon Sling

1. Follow the precautions below to use nylon slings

safely.



Attach protectors (soft material) on the corners of

the load so that the nylon sling does not directly

contact the corners. This will prevent the nylon

sling from being damaged and the lifted load from

slipping.



Lower the temperature of the lifted load to lower

than 100 °C (212 °F). If the temperature of the lifted

load is over 100 °C (212 °F), do not lift the load.



Do not lift acid or alkali chemicals.



Take care not to allow the sling to become wet. The

load may slip.



When required to use more than one sling, use slings

with the same width and length to keep the lifted

load balanced.



When lifting a load using an eyehole, be sure to

eliminate any gaps between the sling and load.

(Refer to the right illustration.) Reduce the load

weight so that it is less than 80 % of the sling

breaking force.



Avoid using twisted, bound, connected, or hitched

slings.



Do not place any object on twisted or bent slings.

(Refer to the right illustration.)



When removing the slings from under the load, take

care not to damage the nylon slings. Avoid contact

with protrusions.



Avoid dragging slings on the ground, throwing

slings, or pushing slings with a metal object.



When using with other types of slings (wire rope) or

accessories (shackle), protect the joint so that the

nylon sling is not damaged.



Store the nylon slings indoors so that they won’t

deteriorate with heat, sun light, or chemicals.

a - Correct Eyehole Lifting

Method

b - Incorrect Eyehole Lifting

Method

c - Bent of Sling

W102-04-02-016

W105-04-01-008

W162-01-01-009

WLBJE0-EN-00

Содержание ZX170W-5A






























































Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды

Hitachi ZX170W-5A, Руководство по ремонту

Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды