Hitachi ZX170W-5A Скачать руководство пользователя страница 42

Страница: 42 / 61

SAFETY

SA-36

SA-226

Handle Chemical Products Safely



Direct exposure to hazardous chemicals can cause serious

injury. Potentially hazardous chemicals used with your

machine include such items as lubricants, coolants, paints,

and adhesives.



Safety Data Sheet (SDS) provides specific details on

chemical products: physical and health hazards, safety

procedures, and emergency response techniques.



Check the SDS before you start any job using a hazardous

chemical. That way you will know exactly what the risks

are and how to do the job safely. Then follow procedures

and use recommended equipment.



See your authorized dealer for SDS’s (available only in

English) on chemical products used with your machine.

Dispose of Waste Properly



Improperly disposing of waste can threaten the

environment and ecology. Potentially harmful waste used

with HITACHI equipment includes such items as oil, fuel,

coolant, brake fluid, filters, and batteries.



Use leakproof containers when draining fluids. Do not use

food or beverage containers that may mislead someone

into drinking from them.



Do not pour waste onto the ground, down a drain, or into

any water source.



Air conditioning refrigerants escaping into the air can

damage the Earth’s atmosphere. Government regulations

may require a certified air conditioning service center to

recover and recycle used air conditioning refrigerants.



Inquire on the proper way to recycle or dispose of waste

from your local environmental or recycling center, or from

your authorized dealer.

SA-2579

WLBJE0-EN-00

Содержание ZX170W-5A






























































Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды

Hitachi ZX170W-5A, Руководство по ремонту

Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды