Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
MENU
on the remote control. The main menu will
appear.
3
Select the line ’
MANUAL SEARCH
’ with
P-
=
or
;
P+
and confirm with
OK
.
INSTALLATION
MANUAL SEARCH
CHANNEL/FREQ.
è CH
p
ENTRY/SEARCH
02
PROGRAMME NUMBER
01
TV CHANNEL NAME
BBC1
DECODER
OFF
NICAM
ON
FINE TUNING
+1
________________________________
TO EXIT
PRESS
MENU
4
Select the line ’
PROGRAMME NUMBER
’ with
P-
=
or
;
P+
.
5
Select the desired programme number (e.g.: ’
P01
’) with
Q
or
P
.
6
Enter the channel of the desired TV channel in line
’
CHANNEL NUMBER
’ with the number buttons
0-9
.
Note:
If you don’t know the channel number of the desired
TV channel, hold
P
in line ’
CHANNEL NUMBER
’ to start
the automatic search.
Repeat automatic search you until have found the desired
TV channel. A changing channel number will appear on the
TV screen.
7
If you want to allocate a decoder, in line ’
DECODER
’
select ’
ON
’ with
P
.
8
This video recorder can receive Hi-Fi sound
transmissions in ’NICAM’. However, if sound distortion
occurs with poor reception, you can switch ’NICAM’ off.
To do this, select ’
OFF
’ in line ’
NICAM
’ with
P
or
Q
.
9
Press
OK
to store the TV channel. ’
STORED
’ will briefly
appear on the TV screen.
Note:
If you want to search for further TV channels, start
again at step
3
.
0
To end, press
MENU
.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket
AV2 EXT2
.
To do this, select programme number ’
E1
’ with
0
on the
remote control and then select programme number ’
E2
’ with
P-
=
. You should select the satellite channels on the satellite
receiver itself.
Special installation functions
You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
Automatic TV channel allocation
(Follow TV)
With this function, the video recorder stores the channels in
the same order as on the TV set. This only works if the video
recorder (socket
AV1 EXT1
) and the TV set are
connected
with a scart cable
.
Note:
You must
switch off
any equipment connected to
socket
AV2 EXT2
.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
MENU
on the remote control. The main menu will
appear on the screen.
MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
FOLLOW TV
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
SPECIAL SETTINGS
________________________________
…
OK
†
3
Select the line ’
FOLLOW TV
’ with
P-
=
or
;
P+
and
confirm with
OK
. Take notice of the message on the TV
screen.
4
Press
OK
. ’
TV01
’ will appear in the video recorder
display.
TV01
5
Select programme number ’1’
on the TV set
.
6
