Tuning your TV to your video recorder
1
Insert the small plug of the mains cable into the mains
socket
4
at the back of the video recorder. Insert the
other end of the mains cable into the wall socket.
2
Switch on your TV set and select the programme number
that you have chosen for video playback (see operating
manual for your TV set).
3
The video recorder will now send a welcoming text on
UHF-channel CH35 or 583 MHz.
4
Tune in the TV set until this picture appears.
Note:
Note that if you were using a video recorder before,
you will probably need to retune the ’video channel’ on your
TV to obtain this picture.
CONGRATULATIONS
YOU NOW OWN A NEW
VIDEO RECORDER
CONTINUEpOK
5
When the TV has been tuned in read the paragraph
’Initial Installation’.
If you experience picture interference, please read ’Reducing
picture disturbance (’optimizing the modulator’)in the chapter
’ADDITIONAL FUNCTIONS’ in the operating manual.
Initial Installation
The video recorder will search for all TV channels.
It stores TV channels found in the following sequence: BBC 1,
BBC 2, ITV, CH 4, CH 5, SKY, others.
1
If the aerial (antenna) has been connected, press the
OK
button on the remote control.
2
’AUTOINSTALL’ starts. The video recorder will search for
all TV channels.
AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
Wait until all TV channels have been found. This can take
several minutes. The video recorder stores the TV
channels found in the following sequence: BBC 1, BBC 2,
ITV, CH 4, CH 5, SKY, others.
The clock and date
information is also set during the Autoinstall process
.
3
When ’AUTOINSTALL’ has finished, the message ’READY’
will briefly appear on the TV screen.
2
3103
166
27621
0175/000
VT-FX940EUKN
(WwnnNNNwwnwNNnwnWwnNnNNwwNwnnW)
