7
If your TV set
automatically switches
to programme
number e.g.: ’EXT’, ’0’, or ’AV’, this text will appear on the
TV screen:
CONGRATULATIONS
YOU NOW OWN A NEW
VIDEO RECORDER
CONTINUEpOK
Note:
If your TV set does not switch to programme number
e.g.: ’EXT’, ’0’, or ’AV’ automatically, select the programme
number for the video recorder manually (see instruction
manual TV set).
8
When the TV has been tuned read the paragraph ’Initial
installation’ in the chapter ’INSTALLING YOUR VIDEO
RECORDER’.
Connecting without a scart cable
1
Switch off the TV set.
2
Remove the aerial cable plug from your TV set and insert
it into the
2
socket at the back of the video recorder.
3
Plug one end of the aerial cable provided into the
3
socket on the video recorder and the other end into the
aerial input socket on your TV set.
4
Insert one end of the mains cable into the mains socket
4
at the back of the video recorder and plug the other
end into the wall socket.
5
Switch on your TV set and select the programme number
that you have chosen for video playback (see instruction
manual TV set).
6
Tune in the TV set until this picture appears.
Note:
The video recorder will now transmit on channel 35 or
583MHz.
CONGRATULATIONS
YOU NOW OWN A NEW
VIDEO RECORDER
CONTINUEpOK
Note:
If the picture quality of TV channels on your TV is
poor, please read the section ’Reducing picture disturbance
- optimizing the modulator’ in the chapter ’ADDITIONAL
FUNCTIONS’.
7
When the TV has been tuned read the paragraph ’Initial
installation’ in the chapter ’INSTALLING YOUR VIDEO
RECORDER’.
Connecting other equipment
You can connect additional equipment to the
AV2 EXT2
socket.
For example: a decoder, a satellite receiver or a camera
recorder.
You can connect a hifi-stereo set to the socket
AUDIO OUT L R
(audio output left/right).
4
