Hitachi UltraVision UT37V702 Скачать руководство пользователя

Страница: 11 / 56

ENGLISH

SAFETY PRECAUTIONS (continued)

Child Safety Notice

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips

in mind:

THE ISSUE

The home theater entertainment experience is a growing trend and larger

•

flat displays are popular purchases. However, flat panel displays are

not always supported on the proper stands or installed according to the

manufacturer’s recommendations.

Flat Panel displays that are inappropriately situated on dresser, bookcases,

•

shelves, desks, speakers, chest or carts may fall over and cause injury.

HITACHI CARES!

The consumer electronics industry is commited to making home

•

entertainment enjoyable and safe.

TUNE INTO SAFETY

One size does NOT fit all. Follow the manufacturer’s recommendations

•

for the safe installation and use of your flat panel display.

Carefully read and understand all enclosed instructions for proper use

•

of this product.

Don’t allow children to climb on or play with furniture and television

•

sets.

Don’t place flat panel displays on furniture that can easily be used as

•

steps, such as a chest of drawers.

Remember that children can become excited while watching a program,

•

especially on a “larger than life” flat panel display. Care should be taken

to place or install the display where it cannot be pushed, pulled over,

or knocked down.

Care should be taken to route all cords and cables connected to the

•

flat panel display so that they cannot be pulled or grabed by curious

children.

WALL MOUNTING:

IF YOU DECIDE TO WALL

MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

Use a mount that has been recommended by the display manufacturer

•

and/or listed by an independent laboratory (such as UL, CSA, ETL).

Follow all instructions supplied by the display and wall mount

•

manufacturers.

If you have any doubts about your ability to safely install your flat panel

•

display, contact your retailer about professional installation.

Make sure that the wall where you are mounting the display is

•

appropiate. Some wall mounts are not designed to be mounted to walls

with steel studs or old cinder block construction. If you are unsure,

contact a professional installer.

A minimum of two people are required for installation. Flat panel

•

displays can be heavy.

Содержание UltraVision UT37V702

























































Результаты поиска

Содержание UltraVision UT37V702

Отзывы:

Похожие инструкции для UltraVision UT37V702

Бренды по названию

Популярные бренды

Hitachi UltraVision UT37V702, Руководство по эксплуатации

Результаты поиска

Содержание UltraVision UT37V702

Отзывы:

Похожие инструкции для UltraVision UT37V702

Бренды по названию

Популярные бренды