3
Mounting Nuts and Washers
Screw nuts and washers on the suspension bolts before
mounting the indoor unit.
N O T E
0DNHVXUHWRXVHZDVKHUVDFFHVVRULHVIRU¿[LQJWKHVXVSHQVLRQ
EROWVWRWKHVXVSHQVLRQEUDFNHWV7KHZDVKHUZLWKLQVXODWLRQPXVW
EH¿WWHGZLWKWKHLQVXODWLRQVLGHGRZQZDUGWRIDFLOLWDWHKDQJLQJZRUN
(mm)
Surface of ceiling
Nut (Field-supplied)
Nut (Field-supplied)
$SSUR[
Suspension bolt
(Field-supplied)
Washer (Accessory)
Washer with insulation
(Accessory)
Suspension bracket
(Attached indoor unit)
4
Mounting Indoor Unit
a.
Lift up the indoor unit by a hoist, and do not apply any
force to the drain pan (the air outlet portions and the
drain pan portion).
Drain pan
Suspension
bolt
Suspension
bracket
b.
Insert the suspension bolts into the notches of the
suspension brackets to hook the indoor unit.
c.
Secure the indoor unit using nuts and washers. Then
check that the washers serve as stoppers at the rising
parts of the suspension brackets.
N O T E
$IWHUKRRNLQJXSWKHLQGRRUXQLWSLSLQJDQGZLULQJZRUNLQVLGH
WKHFHLOLQJDUHUHTXLUHG7KXVHVSHFLDOO\LIWKHIDOVHFHLOLQJ
KDVDOUHDG\EHHQLQVWDOOHGGHWHUPLQHWKHSLSHGLUHFWLRQDQG
FRPSOHWHWKHUHVWRIWKHSLSLQJDQGZLULQJZRUNEHIRUHKRRNLQJ
WKHLQGRRUXQLW
5
Adjusting Indoor Unit Position
Adjust the position of the indoor unit with the checking scale
as required.
a.
For False Ceiling with Opening
When installing the indoor unit to the false ceiling with an
opening, check the dimension of opening and adjust the
clearance between the indoor unit and the opening.
Attach the
scale to the
surface of
ceiling
Attach the scale
to the bottom
side of the unit
Checking scale
Check the 4 corner of the clearance
between the IU and the opening
For long dimension of opening
For short dimension of opening
Checking
scale
Indoor unit
Indoor unit
Surface of ceiling
b.
For False Ceiling without Opening
,IWKHUHLVQRRSHQLQJLQWKHH[LVWLQJIDOVHFHLOLQJSURYLGH
an opening in it before mounting the indoor unit. Cut out
the false ceiling. After hooking up the indoor unit, adjust
the position according to the procedure (a).
67
0
Dimension of opening
Pattern board for installation
Dimension of opening
1060 (0.8 to 3.0 HP)
1620 (4.0 to 6.0 HP)
(mm)
20
20
100
100
Indoor unit
View for the bottom
ENGLISH
INDOOR UNIT INSTALLATION
PMML0416A rev.0 - 12/2015 - P5415720
19
