Hitachi RAC-R10C-1, Инструкция по эксплуатации

Страница: 16 / 22

– 16 –
ATTACHING THE AIR CLEANSING AND DEODORIZING FILTERS
1
Open the front panel.
● Pull up the front panel by holding it at both sides
with both hands.
2
Remove the filter.
● Push upward to release the claws and pull out the
filter.
3
Attaching the air-cleansing & deodorizing filters to
the filter frame.
● Attach the air-cleansing & deodorizing filters to the
frame by gently compress its both sides and release
after insertion into filter frame.
4
Attach the filters.
● Attach the filters by ensuring that the surface written
“FRONT” is facing front.
● After attaching the filters, push the front panel at
three arrow portion as shown in figure and close it.
Cleaning and maintenance must be carried out only by qualified service personal. Before cleaning,
stop operation and switch off the power supply.
CAUTION
CAUTION
Do not bend the air-cleansing &
deodorizing filter as it may cause
damage to the structure.
NOTE
● In case of removing the air-cleansing & deodorizing filters, please follow the above procedures.
● The cooling capacity is slightly weakened and the cooling speed becomes slower when the air-cleansing
& deodorizing filters are used. So, set the fan speed to "HIGH" when using it in this condition.
● Air-cleansing & deodorizing filters are not washable and can be use in 1 year time. Type number for
this air cleansing filter is <SPX-CFH11>. Please use this number for ordering when you want it.
●
Do not operate the air conditioner without filter. Dust may enter the air conditioner and fault may occur.
!
!