Hitachi RAC-R10C-1, Инструкция по эксплуатации

Страница: 9 / 22

ENGLISH
– 9 –
SUPER COOLING ONE TOUCH
■
Use this mode whenever you want more cooling immediately.
1
Press button
●
Operation start with a signal received sound “beep” and sign
blink.
●
Initial setting temperature changed to 16°C and fan speed is changed
to maximum speed (Indicated by sign).
●
Unit continues to operate in this mode for 1 hr. After that fan speed
changed to auto fan mode. The indicator of light and remote do not
change until unit operation is off or mode is changed.
SILENT
SILENT
SUPER
SILENT
SILENT
SUPER
SILENT
SILENT
SUPER
SUPER
SUPER
■
If press “SUPER” button again during super operation, unit will re-
operated in this mode again for 1 Hr.
Room Temperature Setting
Up up when too cool.
DOWN unable to down because this setting temperature is
the lowest (16°C).
2
▲
▲
3
FAN SPEED SETTING
●
Press to change fan speed as the below sequence
HIHI HIGH MED LOW
[ [ [
[ [ [
■
When operate in this mode, can not use TIMER RESERVATION
mode.
STOP “SUPER MODE”
●
Press to stop this mode and change the mode to other.
● Press to stop this mode and also turn off the unit.
4
Fan speed can not operated with “HIHI” when you press button as the situation below. It is not
abnormal. About 3 minutes later fan speed will be changed to “HIHI” automatically itself.
1. If you press button within 3 minutes after stop the operation for “Cooling” of “Dehumidify”.
2. If you press button within 3 minutes after compressor stopped. (When operated in “Cooling”
or “Dehumidify” and the room temperature is almost reached to the setting temperature, compressor
will stop.)
SUPER
SUPER
SUPER