Hitachi RAC-R10C-1, Инструкция по эксплуатации

Страница: 7 / 22

ENGLISH
– 7 –
AUTOMATIC OPERATION
■
The device will automatically determine the operation mode either COOL or DEHUMIDIFY, depending
on the initial room temperature. The selected operation mode will not change when the room
temperature varies.
1
Press the (START/STOP) button
● Operation start with a “beep”.
Press the (START/STOP) button
● The fan speed selector does not work at this operation.
STOP
Press the (ROOM TEMPERATURE) button
● Temperature setting change by 1°C for each 1 time press.
Up
Down
● You can raise or lower the temperature setting by a maximum of
3°C.
● The display does not indicate the preset temperature in the Automatic
mode. Device will receive the setting by a “beep”.
■
You can slightly adjust the room temperature.
1
■
CONDITION OF AUTOMATIC OPERATION
●
The selected mode of operation will not change during the operation even though the room
temperature change.
Over 27°C COOL
16 ~ 27°C
FUNCTION
27°C
Slightly lower than the
room temperature
LOW
FAN SPEED
● When the difference of room
temperature and setting
temperature is large, fan starts
to run at HI speed,
●
After room temperature come
to the preset temperature, the
cooling operation, which
changes the fan speed and
room temperature to obtain
optimum conditions for natural
healthful cooling, will be
performed.
DEHUMIDIFY
-
INITIAL ROOM
TEMPERATURE (APPROX.)
TEMPERATURE
SETTING
SILENT
SILENT
SUPER
SILENT
SILENT
SUPER
▲
▲
-