background image

2.2  ADDITIONAL INFORMATION ABOUT SAFETY

!

D A N G E R

HITACHI is not able to foresee all the circumstances which may

result in a potential danger.

Do not pour water in the indoor or outdoor unit. These products

are fitted with electric components. If water comes into contact 

with  electric  components,  this  will  cause  a  serious  electric 

shock.

Do not handle or adjust the safety devices inside the indoor and

outdoor units. The handling or adjustment of these devices may 

result in serious accident.

Do not open the service cover or access panel of the indoor and

outdoor units without disconnecting the main supply.

In  the  event  of  fire,  switch  off  the  mains,  put  out  the  fire

immediately and contact your service supplier.

Check that the earth cable is correctly connected.

Connect the unit to a circuit breaker of the specified capacity.

!

C A U T I O N

Refrigerant leaks may hinder respiration as the gas displaces the air

in the room.

Fit the indoor unit, the outdoor unit, the remote control and the cable

at a minimum of 3 metres away from sources of strong radiation from 

electromagnetic waves, such as medical equipment.

Do not use sprays, such as insecticides, varnishes or enamels or any

other inflammable gas within a metre of the system.

If the circuit breaker or supply fuse of the unit comes on frequently,

stop the system and contact the service suppler.

Do not carry out maintenance or inspection work yourself. This work

must be carried out by qualified service personnel with suitable tools

and resources for the work.

Do not place any foreign material (branches, sticks, etc.) in the air

inlet or outlet of the unit. These units are fitted with high speed fans

and contact with any object is dangerous.

This  appliance  must  be  used  only  by  adult  and  capable  people,

having  received  the  technical  information  or  instructions  to  handle

this appliance properly and safely.

Children should be supervised to ensure that they do not play with

the appliance.

?

N O T E

The air in the room should be renewed and the room ventilated every

3 or 4 hours.

The  system  fitter  and  specialist  shall  provide  anti-leak  safety  in

accordance with local regulations.

3  IMPORTANT NOTICE

This air conditioner has been designed for standard air 
conditioning for human beings. For use in other applications, 
please contact your HITACHI dealer or service contractor.

The air conditioning system should only be installed by qualified 

personnel, with the necessary resources, tools and equipment, 
who are familiar with the safety procedures required to 
successfully carry out the installation.

 PLEASE READ AND FAMILIARISE YOURSELF 

WITH THE MANUAL BEFORE STARTING WORK ON THE 

INSTALLATION OF THE AIR CONDITIONING SYSTEM.

 

Failure to observe the instructions for installation, use and 
operation described in this Manual may result in operating 
failure including potentially serious faults, or even the 
destruction of the air conditioning system.
It is assumed that the air conditioning system will be installed 
and maintained by responsible personnel trained for the 
purpose. The customer should include all the safety, caution 
and operating signs in the native language of the personnel 
responsible.
Do not install the unit in the following places, as this may lead to 

a fire, deformities, rusting or faults:

Places where oil is present (including oil for machinery).

Places with a high concentration of sulphurous gas, such as
spas.

• Places where flammable gases may be generated or

circulate.

Places with a saline, acidic or alkaline atmosphere.

Do not install the unit in places where silicon gas is present. Any 
silicon gas deposited on the surface of the heat exchanger will 

repel water. As a result, the condensate water will splash out 
of the collection tray and into the electrical box. Water leaks or 
electrical faults may eventually be caused.
Do not install the unit in a place where the current of expelled 
air directly affects animals or plants as they could be adversely 
affected.
Do not reconstruct the unit. Water leakage, fault, short circuit or 

fire may occur if you reconstruct the unit by yourself.

Please use an earth wire. Do not place the earth wire near 
water or gas pipes, lightning conductors, or the earth wire of 
a telephone. Improper installation of earth wiring may cause 

electric shock or fire.

Should an abnormal situation occur (like a burning smell), 
please stop operating the unit and turn off the circuit breaker. 
Fire may occur if you continue to operate the unit in an 
abnormal situation.
Please contact your agent if you need to remove and reinstall 

the unit. Electric shock or fire may occur if you remove and 

reinstall the unit improperly by yourself.
If the power supply cord is damaged, it must be replaced with 
the special cord obtainable at authorized service/parts centres.
Please consult with your dealer if the air conditioner does not 
cool, since refrigerant leakage may be considered as one of 
the causes. The refrigerant gas used in the air conditioner is 
harmless. However, harmful by-products may be generated if 
the refrigerant gas leaks into the room and enters in contact with 

fire or a source of heat such as a stove heater. In the event of a 

gas leakage, immediately stop the air conditioner, open doors 
and windows to ventilate the room thoroughly and contact your 
dealer.

IMPORTANT NOTICE

PMML0477 rev.1 - 10/2017

2

Содержание RAC-E50YHA




































Отзывы: