Hitachi RAC-13EX9G, Инструкция по эксплуатации

Страница: 11 / 80

ENGLISH
BAHASA MELAYU
THAILAND
–
11
–
COOLING OPERATION
Press the FUNCTION selector so that the display
indicates (COOL).
Use the device for cooling when the outdoor temperature is 21-42°C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor
unit.
Set the desired FAN SPEED with the (FAN SPEED)
button (the display indicates the setting).
(AUTO) : The FAN SPEED is HI at first and
varies to MED automatically when
the preset temperature has been
reached.
(HI) : Economical as the room will
become cool quickly.
(MED) : Quiet.
(LOW) : More quiet.
(SILENT) : Silent.
Press the (START/STOP) button. Cooling operation
starts with a beep. Press the button again to stop
operation. The cooling function does not start if the
temperature setting is higher than the current room
temperature (even though the
(OPERATION) lamp
lights).
The cooling function will start as soon as you set the
temperature below the current room temperature.
■
As the settings are stored in memory in the remote
controller, you only have to press the
(START/STOP)
button next time.
1
2
Set the desired room temperature with the
TEMPERATURE button (the display indicates the
setting).
The range of 25-28°C is recommended as
the room temperature for cooling. If the
temperature setting is 27°C, the room
temperature will be controlled at around
27°C.
The temperature setting and the actual room
temperature may vary somewhat depending on
conditions.
3
START
STOP
RAS13EX9G_EN(11-24).p65 3/8/07, 2:44 PM 11