61
How to Remove/Attach Parts
Ice Case
(Ice Compartment)
・
Upper Freezer Case
(Upper Freezer)
Slide case, Lower Freezer Case
(Lower Freezer)
When installing it, insert the pins on the left/right of the Lower freezer case into the square holes on the frame to install it.
Moreover, hitch the pins on the left/right of the Slide case to the outside of the Lower freezer case.
Draw the door fully and lift up the case
towards you.
Put the case bottom on the frame and set the case.
Underside of the case
Frame
Slimline slide case
Draw the door fully, and draw the Slide case
respectively.
Lift up the Lower freezer
case.
Slide case
Pin (right and left)
Fork (right and left)
Rectangle
hole in the
frame
How to attach the slide door
(Ice Compartment/Upper Freezer/Lower Freezer/Vegetable Compartment)
Ice Compartment/Upper Freezer
Lower Freezer/Vegetable Compartment
Frame
Frame
●
Do not remove the Slimline slide case.
Caution
Frame
Lower freezer
case
Seal
●
Do not peel off the adhesive
seal.
Caution
Upper Case, Partition, Lower Case
(Vegetable Compartment)
Draw the door fully
and pull up both hands
further to pull it out
slowly and to place it
on the floor.
Pull up the Upper
Case as shown in
the figure.
Lift up the Lower
Case toward you.
Remove the partition.
●
Hold the both ends of
the partition and lift it up
straight.
●
Do not remove the door completely.
●
When opening the door, do not place your foot near the door.
Doing so may get your foot caught between the door and the floor.
●
Be careful. Water may drip from
the backside of the lower case.
●
Be sure to remove the partition
before removing the lower case.
Caution
Caution
Notice
●
Improper mounting of the partition or the Upper Case may damage its parts. Once it is
mounted, slide the Upper Case back and forth to check to see if it is mounted properly.
●
Do not remove the Moisture Cover and Unit in the Lower Case.
Request
Upper Case
Lower Case
To install the Lower Case, put the lugs on the right and left of the lower case into the square holes
on the frame, and place the fringe of the lower case on the frame to set.
Wrong setting may cause abnormal noise or half-closed door when opening or closing the door.
To mount the partition, insert it into the Lower Case, with the character [R] visible
in the lower right of the front, until it reaches the bottom of the Case.
Partition
Lower Case
