60
●
Before removing parts, take out all the foods on the parts.
●
Do not remove parts except the ones listed here.
Please contact with a Hitachi customer service centre for cleaning such parts after removing them.
HOW TO REMOVE/ATTACH PARTS
Caution
Fixed shelf
Height adjustable lower shelf
If you pull out the shelf straight, it may hit the door.
Caution
Draw the shelf, and pull off the 2 pins on the
lower right and remove it.
Slightly lift up and pull out.
Forks
Check if it is fixed properly by taking it in and out a few times.
Request
Vacuum Case
Pull out the Vacuum Case by slightly
lifting up and moving up and down.
Insert the Vacuum Case so that
both right and left convex ribs on
the case can slide under the guide
rail of the Vacuum Container.
Lastly, hold down the handle to
lock.
How to remove
How to attach
Guide rail
Vacuum Case
Vacuum Container
Convex rib
Height adjustable upper and middle shelf
When installing the shelf, slide it until it reaches to the interior wall, then slightly lift up
the back of the shelf and push it in.
(hitch the forks of the shelf to the parts on the back of the shelf)
Slightly lift up the back
of the shelf and draw it.
Raise the shelf,
as shown in the
drawing.
Rotate and
remove it.
Forks of the shelf (Right / Left)
Door may be damaged if you draw the shelf without turning it.
Be careful to attach/remove the glass shelf because it is heavy.
Notice
Door pocket
Tap
Tap
Lift up the door pocket while tapping the left/right of its bottom surface, and remove it.
(It is fixed a little tightly.)
Caution
Insert the door pocket fully to the end when installing it.
If it drops, it may break and cause bruise or injury.
Upper
shelf
Middle
shelf
