0
2
3
1
Frame
2
1
Chill case
2
1
Pin
Door pocket
Ice Compartment/ Upper Freezer
Lower Freezer
Ice Compartment/Upper Freezer
Vegetable Compartment/Lower Freezer
Tap
Frame
Frame
Height adjustable shelf
Reversing shelf
Fixed shelf
Chill case
Vegetable Compartment
Slightly lift up the back
of the shelf and draw it.
Raise the shelf as shown in the figure,
and turn it and remove it.
When installing the shelf, slide it until it reaches to the interior wall, then
slightly lift up the back of the shelf and push it in.
(Hitch the pin of the shelf to the parts on the interior wall)
Draw the door fully, and draw the Slimline
slide case and the Slide case respectively.
Lift up the Lower freezer case.
■
How to install the slide door
Frame
Frame
HOW TO REMOVE PARTS
Caution
The door may damage if drawing the shelf without lifting it.
●
Slightly lift up the shelf and
remove it.
●
Draw the shelf, and pull off the
two pins on the lower right and
remove it.
●
Draw the case fully, and slightly
lift up its front part and remove it.
●
Draw the door fully and pull up the
Small vegetable case as shown in
the figure.
●
Lift up the front part of the door,
and draw it further and incline it.
●
Lift up the Vegetable Case.
●
When installing it, insert the pins
on the left/right inner sides of the
Vegetable Case into the square
holes on the frame, and put the
edge of the Vegetable Case on the
frame to install it.
●
Lift up the door pocket while tapping the left/right
of its bottom surface, and remove it.
Insert the door pocket fully to the end when installing it
●
Draw the door fully and lift up the case towards you.
When installing it, insert the 4 pins on the left/right of the
case into the square holes on the frame to install it.
When installing it, insert the pins on the left/right of the Lower freezer case into the square holes on the
frame to install it.
Moreover, hitch the pins on the left/right of the Slide case to the outside of the Lower freezer case.
How To Remove Parts
