Freezer Compartment Lamp
1. Put your finger on the handle on the bottom of the lamp cover,
then pull the lamp cover towards yourself to remove it.
2. Pull the freezer lamp downward to remove it.
3. When installing a lamp, align the electrodes and push it all the way to the back.
4. Install the lamp cover by first inserting the two top hooks, then inserting the bottom hooks.
Refrigerator Compartment Lamp
1. Put your finger on the handle on the bottom of the lamp cover,
then pull it towards yourself to remover it.
2. Pull the lamp towards yourself to remove it.
3. When installing a lamp, align electrodes and push it all the way to the back.
4. Install the lamp cover by first inserting the three bottom hooks, then inserting the top hooks.
How to Remove Parts
(Continued)
Ŷ/LIWWKHFRYHUXSDQGSXOOWKHOHIWDQGULJKWVKDIW
inward to remove it.
Dairy Pocket Cover
Warning
Ŷ
Be sure to unplug the power cord when replacing lamps inside the refrigerator.
If you do not unplug the power cord, these is a risk of electric shock or injury.
Ŷ
Only use specifiled lamps inside the refrigerator.
If lamps other than those specified are used, there is a risk of fire. Please consult with retailers and the service center.
Ɣ
Securely plug in the power cord after replacing the lights.
If the power cord is not completely plugged in, there is a rish of electric shock or fire.
23
Vegetable Compartment Lamp
1. Pull out and remove the upper vegetable compartment drawer and door.
2. First, insert a flatblade screw driver into the hole on the right side of the
lamp cover, and pull the hole section downwards to release the hook.
Since there are four holes as shown in the figure, do the same for all
the holes. After finishing, pull the lamp cover downward to remove.
3. When installing a lamp, align the electrodes and push it all the
way in to the back.
4. Insert the 4 hooks on the front of the lamp cover first, then push
the back of the lamp cover until it snaps into place.
Replacing Lamp inside Refrigerator
Part Removal
