Hitachi R-B330ERU4V, Инструкция по эксплуатации

Страница: 24 / 60

EN - 22 -
If your refrigerator does not operate;
• Is there a power failure?
• Is the plug connected to the socket correctly?
• Is the fuse of the socket to which the plug is connected or the main fuse blown?
PART- 6.
BEFORE CALLING THE SERVICE
Check Warnings;
Your fridge warns you if the temperatures for fridge and freezer are at incorrect levels or
when a problem occurs in the appliance. Warning codes are displayed in the Freezer and
Fridge Indicators.
ERROR TYPE ERROR TYPE WHY WHAT TO DO
SR
Failure
Warning
There is/are some
part(s) Out of order
or there is a failure in
cooling process
Call Service for assistance as soon
as possible.
LF
Freezer comp. Not
Cold enough
This caution will be
seen especially after
long term of power
failure
1. Do not freeze the foods that
are thawed and use in short time
period.
2. Set the freezer temperature
to colder values or set the super
freeze , until the compartment gets
to normal temperature.
3. Do not put fresh food until this
failure is off.
LC
Refrigerator comp.
Not Cold enough
Ideal temperature for
Ref. Compartment is
+4
o
C. If you see this
warning your foods
have risk of spoiling.
1. Set the refrigerator temperature
to colder values or set the super
cooling mode until the compartment
gets to normal temperature.
2. Do not open the door much until
this failure is off
LF and LC
not cold enough
Warning
It is the combination of
LF and LC Error type
You will see this failure when first
starting the appliance. It will be off
after the compartments reach their
normal temperature
HC
Refrigerator comp.
too Cold
The foods starts to
freeze because of
the too much cold
temperature
1. Check if the “Super cooling
mode” is on
2. Decrease the refrigerator
temperature values
LOPO
Low voltage
Warning
When the power
supply gets lower than
170 V the appliance
gets to steady position.
This not a failure. This prevents any
damages on the compressor. This
warning will off after the voltage
gets required level