Hitachi PXR, Руководство по обслуживанию

Страница: 13 / 231

1-7
Ensure that all electrical wiring, connections and grounding comply
with applicable codes. Properly connect the printer to its dedicated
ground.
Complete the above procedure to avoid electrical shock hazards.
Ink and makeup ink must be stored as flammable liquids. Storage
must comply with local regulatory requirements. Consult the
appropriate regulatory agency for further information.
If extraneous noise enters the printer, it may malfunction or break down.
For maximum noise immunity, observe the following installation and
wiring precautions.
(1) Ensure that 100 to 120 VAC or 200 to 240 VAC power cables are not
bundled with other power supply cables.
(2) Insulate the printer main body and print head so that they do not come
into direct contact with the conveyor or other devices.
(3) If the employed printing target detector is housed in a metal case, use a
plastic mounting brace for the purpose of insulating the detector from the
conveyor and other devices.
(4) Be sure that the printing target detector wiring is not bundled together with
other power supply cables.
When replaced with an incorrect type of battery, the battery is in
danger of exploding. Be sure to replace the battery with the one
specified by parts list.
When disposing of the battery (lithium battery), you must comply with local
regulatory requirements. Consult the appropriate regulatory agency for further
information.
When handling PCB or electrical parts, take enough care the electrostatic
Electrical devices are mounted on the printed circuit boards and electrical parts
that are sensitive to the electrostatic.
Be sure to eliminate the electricity by using a grounding wrist band or others when
handling them.
Caution
Safety Precautions (Continued)