Hitachi PC-ALHP1, Инструкция по установке и эксплуатации

Страница: 12 / 24

b. Press the service hole to remove the remote control switch cover.
2 Remote Control Switch Covers
Press here by screwdriver or a stick to remove the
remote control switch cover
Position for Receiver Kit (It can be attached to both
of right side and left side)
5 Attach the receiver kit to the lower cover.
a. Insert the receiver kit and the connecting cable to the position for receiver kit.
b. Lead the connecting cable through the hole for connecting cable.
c. Catch 3 hooks of receiver kit onto the square holes.Pay attention to the direction of receiver kit when it is attached.
Receiver Kit
Attaching DIrection for
Receiver Kit
Hook
Receiver Kit
Service Hole
Hole for Connecting
Cable
Hook
N O T E :
Check whether the receiver kit is securely fixed.
6 Lead the connecting cable into the electrical box with other wires.Attach the accessory insulation to the edge of side cover R in
order to prevent a scratch by contacting the connecting cable to the edge of side cover R.
Side Cover R
Side Cover R
Insulation
Put the side cover R and the flange at
lower cover between insulations.
Connecting Cable for Receiver Kit
Lower Cover
Lower Cover
4 PMML0314A rev.0 - 09/2013 - P5415315
Installation