Hitachi KP-D5000, Руководство по эксплуатации

Страница: 7 / 54

7
Connections
Video output connection
Video output is connected from the camera back panel to the
video imput of the monitor via coaxial cable. If two or more
monitors are connected in a loop, set the 75Ω switch of only
the final monitor to ON.
The type of coaxial cable (75Ω) is decided according to the
distance with the connected device. The standard maximum
cable lengths without any unmarkable deterioration of image
are as follows.
3C-2V
・・・・
150m
5C-2V
・・・・
200m
7C-2V
・・・・
300m
10C-2V
・・・・
400m
Set the 75Ω switch of only the final monitor to on.
75Ω coaxial
cable
75Ω coaxial
cable
75Ω coaxial
cable
Color monitor
No.1
Color monitor
No.2
Color monitor
No.3
Power cable connection
Any special power supply is not required. Be sure to use the
power source specified in the specification.
(Please use the power supply of current capacity of 1A or
more, though it depends on the connected devices.)
Morever, please note that there is polarity in the 12V DC
power supply.
KP-D5000
Power supply input ratings
AC24V AC24V AC24V AC24V DC12V DC12V DC12V DC12V
① ① ① ①
1-L
○
+
② ② ② ② 2-N ○ - (GND)
③
③ ③
③ GND Not used
Power supply input specification
ＶＩＤＥＯ
Ｕ
Ｄ ＲＥＭＯＴＥ
ＳＥＴ
ＳＴＡＴＵＳ
１２Ｖ
ＤＣ
ＰＬＡＴＥ ＲＡＴＥＤ
ＳＥＲ．ＮＯ．
② ② ② ② ① ① ① ①
KP-D5010
Camera menu setting operation switch [SETUP]
Various setting and adjustment values are
confirmed and changed with these 3 switches.
Refer to page 15 (Setting menu operations).
Status lamp
・
Normal startup status
：
Green
・
External synchronous mode
：
Orange
Video output connector [VIDEO]
Refer to page 8 (Video output
connection).
REMOTE connector [REMOTE]
Used to remote control the camera
setting
Refer to page 42(Remote operation
of setting menu).
Power supply input terminal
Refer to page 8 (Power supply connection).
8
KP-D5010
Power supply input ratings
DC12V DC12V DC12V DC12V
① ① ① ① ○
+
② ② ② ② ○ - (GND)
Power supply input specification
： 16 ～ 28AWG ： 16 ～ 28AWG
KP-D5000 / KP-D5001
/ KP-D5010