Hitachi KP-D5000, Руководство по эксплуатации

Страница: 10 / 54

The camera setting and adjustments can be changed to meet the using conditions. Use the setting menu displayed on the monitor
screen to check and change the settings and adjustments. The setting menu is comprised as follows.
If the camera is to be suspended to the ceiling, change the position of the tripod adaptor from the bottom to the top of the camera, as
indicated in the figure.
Caution
Use the following type of camera mounting screw.
Type :U 1/4-20
Length:L=7mm
If length of screw is longer than 7 mm, there is risk of
internal damage to the camera. Conversely, if too short,
the camera will not be firmly secured and there is risk of
dropping.
Tripod adaptor
Binding head screws M3 x 8
13
14
Setting menu composition
・
Display character setting
・
Display position setting
White balance mode setting
・
Auto tracking white balance (ATW)
・
Preset white balance (AWC)
・
Manual white balance (MANUAL)
・
R/B gain adjustment etc
Color level adjustment, detail, black
level and digital zoom setting etc
Sub menu (page 38)
・
BLC on/off and area setting
・
Video level adjustment
AGC setting (page 22)
Shutter speed setting (page 23)
Sensitivity enhancement setting (page 24)
Color-B/W selection (page 26)
・
AGC mode setting
Enhancement menu (page 33)
White balance setting (page 28)
・
Burst setting
・
Lens setting etc
Scene file setting (page 17)
Light control menu (page 18)
Camera title setting (page 31)
Main menu
(page 16)
Camera mounting
Setting menu description
Lifting lug installation hole
Tripod installation hole
Camera angle