Hitachi HV-D30 Скачать руководство пользователя страница 42

Страница: 42 / 65

14. OUTPUT/SYNC

On this menu screen, you can make signal changeover for output to the D-SUB connector
and phase adjustment for external synchronization.

1) OUTPUT : Output mode changeover

࡮

R, G, B

㧦

The R, G and B video signals are output to the D-SUB connector.

࡮

Y, R-Y, B-Y

㧦

The Y, R-Y and B-Y signals are output to the D-SUB connector.

࡮

Y/C

㧦

The Y/C and VBS signal is output to the D-SUB connector.

2) COLOR BAR : Color bars ON/OFF

3) MONO : Monochrome (black and white) ON/OFF for the video output signal from the

VIDEO connector

Set to ON for monochrome. Setting ineffective during color bar.

4) Sync/HD out : Selects sync signal output from the rear panel multi connector.

5) SYNC ON G : G video signal synchronization ON/OFF (In the R/G/B mode only)

When output is RGB with Sync on and G on, Sync is added to the G video signal.

6) GL IN : Impedance changeover of input to the GL IN connector.

࡮

HIGH : The high impedance level is provided.

࡮

: An impedance of 75 ohms is provided.

Note: When power to the camera is turned off, the high impedance level is provided.

So, do not use this function in a system where power is turned off for the
camera unit only.

7) GL MODE : GL signal input changeover

࡮

VBS : The VBS signal or BBS (black burst) signal is input as an external

synchronizing signal.

࡮

HD/VD : The HD/VD signal is input as an external synchronizing signal.

Note: During external sync with HD and VD signals, be sure to use either RGB or Y,

B-Y, R-Y output signals. Although VBS and Y/C output signals are also
produced, these cannot be used as normal output signals.

8) SC.COARSE : Coarse adjustment of subcarrier phase

Using the L or R button, select one of the following phases; 0º, 90º, 180º and 270º.

Содержание HV-D30































































Результаты поиска

Содержание HV-D30

Отзывы:

Похожие инструкции для HV-D30

Бренды по названию

Популярные бренды

Hitachi HV-D30, Руководство по эксплуатации

Результаты поиска

Содержание HV-D30

Отзывы:

Похожие инструкции для HV-D30

Бренды по названию

Популярные бренды