Hitachi HadaCrie CM-N58000BF, Инструкция по эксплуатации

Страница: 16 / 39

-12-
7 Wipe off the moisturizing product on the heating dimple head and the body of the device
with a tissue.
6 After 3 minutes have elapsed, the device will automatically shut off. (Auto shutoff function)
The finish sound will inform you.
●
3 Choose "the strength" of electrical potential with the level switch button.
Switch the "strength" with the Level switch button according to the condition of your skin.
Every time the level indicator button is pressed, the “L”,”M” and “H” of the electrical
potential will be switched. There will be no change in vibration strength.
●
Unless you apply the heating dimple head to your skin while touching the back plate,
the device will not vibrate. (skin sensing function)
If the heating dimple head is not vibrating, the device is not working.
If you leave the device as it is for about 3 minutes without vibration, the device will
automatically switch "Off." (Automatic shutoff function)
CAUTION
It is recommended that when using the device for the first time or if you feel some
discomfort, use the device in "L."
Step 3
“HOT MASK”
(It is recommended that you use “HOT MASK” once a day for milky lotion or once or twice
a week for sheet mask.)
Fine vibrations and gentle switching of the electrode enhance the effect of milky lotion or
sheet mask.
1 Place a sheet mask on your face or spread milky lotion or cream that you would
normally use over your entire face.
Wipe off the lotion on your hands.
2 Press the power switch. (Fig.12)
●
●
When the "HOT MOISTURIZE" mode is finished, press the power switch and the
"HOT MASK" mode will automatically be set.
Skin care time is indicated by the buzzer beeping about every 45 seconds as a guide.
[Example of skin care sequence] (Fig. 9)
Divide the area from your face to décolletage into four zones as shown in the
illustration. By moving the heating dimple head in the order of
①② %RWKFKHHNVĺ
③ 7]RQHĺ ④
décolletage, the whole area can be efficiently and uniformly cared for.
Indicating Timer Function
The level indicator lamp will be turned on, and “HOT MASK” on the mode
indicator lamp will start flashing. If a lamp in another mode is flashing, press the mode
switch button to switch to “HOT MASK.”
●
The mode indicator lamp will switch and turn on, and the device will start to vibrate.
The time for use is within 3 minutes.
●
●
5 Apply the heating dimple head directly to the skin and move it slowly. (Fig. 9)
4 Hold the device with your hand touching the back plate of the body. (Fig. 8)
● Make sure to hold the body with your hand touching the back plate.
The memory function memorizes the "strength" when the power has been shut off.
●
Do not apply the device on the same area of skin for more than 10 seconds.
If you feel your skin tingling by micro current while using the device, press the
Level switch button and switch to "L." If you still feel your skin tingling, use the
device by adding more toner or other cosmetics.
The sensor may not sense a spot depending on your toner.
●