Hitachi H8/3670F-ZTAT HD64F3670, Руководство по оборудованию

Страница: 145 / 305

Rev. 1.0, 03/01, page 121 of 280
10.6 Usage Notes
The following types of contention or operation can occur in timer V operation.
1. Writing to registers is performed in the T3 state of a TCNTV write cycle. If a TCNTV clear
signal is generated in the T3 state of a TCNTV write cycle, as shown in figure 10-11, clearing
takes precedence and the write to the counter is not carried out. If counting-up is generated in
the T3 state of a TCNTV write cycle, writing takes precedence.
2. If a compare match is generated in the T3 state of a TCORA or TCORB write cycle, the write
to TCORA or TCORB takes precedence and the compare match signal is inhibited. Figure 10-
12 shows the timing.
3. If compare matches A and B occur simultaneously, any conflict between the output selections
for compare match A and compare match B is resolved by the following priority: toggle
output
>
output 1
>
output 0.
4. Depending on the timing, TCNTV may be incremented by a switch between different internal
clock sources. When TCNTV is internally clocked, an increment pulse is generated from the
falling edge of an internal clock signal, that is divided system clock (
φ
). Therefore, as shown
in figure 10-3 the switch is from a high clock signal to a low clock signal, the switchover is
seen as a falling edge, causing TCNTV to increment. TCNTV can also be incremented by a
switch between internal and external clocks.
ø
Address
TCNTV address
TCNTV write cycle by CPU
Internal write signal
Counter clear signal
TCNTV N H'00
T
1
T
2
T
3
Figure 10-11 Contention between TCNTV Write and Clear