--- 6 ---
CAUTION
The grease should be exchanged once every six months
after the machine is purchased. The authorized HITACHI
power tool repair shop or the shop from where the tool
was bought should be instructed when it is time to
exchange the grease.
Before working on walls, floors, etc., check for buried or
hidden electrical wires and water or gas pipes.
CAUTION
Read thoroughly HANDLING INSTRUCTIONS before use.
7. PRECAUTIONS IN SALES PROMOTION
In the interest of promoting the safest and most efficient use of the Model H 65SB2 Demolition Hammer by all of
our customers, it is very important that at the time of sale the salesperson carefully ensures that the buyer
seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the
meaning of the precautions listed on the caution plate attached to each tool.
7-1. Handling Instructions
Although every effort is made in each step of design, manufacture, and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric tool cannot be completely eliminated. Accordingly,
general precautions and suggestions for the use of electric power tools, and specific precautions and suggestions
for the use of the Hammer are listed in the Handling Instructions to enhance the safe, efficient use of the tool by
the customer. Salespersons must be thoroughly familiar with the contents of the Handling Instructions to be able
to offer appropriate guidance to the customer during sales promotion.
7-2. Caution Plate
Each Model H 65SB2 is provided with a Caution Plate which lists basic precautions (illustrated below) in its use.
Carefully ensure that the customer fully understands and follows these precautions before using the tool.
Caution Plate on the back of the tool case lid
