E-21
Pre-filter
(Guide for cleaning: Once a month)
Remove the pre-filter.
Clean the pre-filter.
Remove the panel.
Reattach the pre-filter.
Reattach the panel.
Install the water tray, and then mount the water tank.
P.E-9
P.E-8
P.E-8
P.E-9
To clean the pre-fi lter, follow the steps below.
Remove the water tank, and then pull out the water tray.
(This is to prevent water leakage.)
Disengage the four tabs of the pre-fi lter.
Use a vacuum cleaner or the like to remove dust. If the dust
cannot be removed, wash off with water. After washing, fully
drain the pre-fi lter and then dry it in a well-ventilated place
not exposed to sunlight.
When you wash, use a soft toothbrush or the like.
If you want to remove dust on the Dust fi lter / deodorizing
fi lter, use a vacuum cleaner. The Dust fi lter / deodorizing fi lter
is not washable.
The pre-fi lter is a consumable part.
When damaged pre-filter needs to be replaced, purchase the replacement part (Part No. EP-DV1000-002).
Pre-filter tab insertion
section
Vacuum
cleaner
attachment
for
cleaning
shelves
Pre-filter
Dust filter
Pre-filter tabs
CAUTION
Insert the four tabs securely into the holes on the purifier
and fi x the pre-fi lter.
When you remove the tank, water may drip from the tank cap. Lay a dry cloth
before removing the water tank.
deodorizing
filter
Cleaning
T_S-EP-A6000.indd 21
T_S-EP-A6000.indd 21
11/18/2011 11:21:00 AM
11/18/2011 11:21:00 AM
