Hitachi CR 13VBY, Технические данные и руководство по обслуживанию

Страница: 31 / 40

--- 28 ---
Fig. 21
(5) Others
* Caution when remounting the Armature [57] to the Housing [62]
The Armature [57] may come off the Ball Bearing 6001VVCMPS2L [56] when removing the Armature [57]
from the Housing [62] . To prevent it, press-fit the Armature [57] to the Ball Bearing 6001VVCMPS2L [56] again
before remounting to the Housing [62] (Fig. 10).
* Be careful of the mounting direction of the Cord Clip [77] . (Fig. 22)
Fig. 22
Cord dia.: More than 8.5 mm,
10.8 mm or less
Cord dia.: More than 6.4 mm,
8.5 mm or less
[77]
[76]
10-2. Lubrication
Attolub MS-No. 2
Outer circumference of Plunger (C) [27]
Groove of Plunger (C) [27]
Inner circumference of Metal (C) [24]
Inner circumference of Guide Sleeve (C) Ass'y [25]
Teeth of the Gear [50]
Pinion of the Armature [57]
5.7-mm diameter hole of Counter Weight (D) [29]
Apply 30 g of grease to Gear Cover (D) [20]
(Gear [50] , Swing Roller [37] and inner
circumference of Guide Sleeve (C) Ass'y [25] )
Slanted portion of Lever (C) [35]
Inner circumference of the Swing Roller [37]
Spherical portion of Recipro Plate (C) [44]
Spherical portion of Recipro Plate (D) [48]
Weight Shaft (D) [30]
Groove of Counter Weight (D) [29]
[47]
[14][15]
[49]
[30]
[28]