Hitachi CR 13VBY, Технические данные и руководство по обслуживанию

Страница: 16 / 40

--- 13 ---
8. COMPARISONS IN CUTTING TIME
Following test data should be used for reference purposes. The graph shows the time (in sec.) required for cutting
a piece of each material. (*Note that the swing cut mode is not selectable if the saw blade is mounted in reverse
for the Model CR 13VBY shipped to the U.S.A. and Canada.)
8-1. Cutting Steel Pipes
A steel pipe 42 mm (1.65") in inner diameter
and 3.2 mm (0.13") in thickness
Pressing force about
5 kgf (11 lbs.)
Blade No. 103
for cutting steel pipes
Swing cutting
Swing cutting
Orbital cutting
Orbital cutting
Orbital cutting
Swing or orbital cutting Straight cutting
CR 13VBY
CR 13VA
J
M
B
0 20 15 10 5
Cutting time (sec./cut)