Hitachi CR 13VBY, Технические данные и руководство по обслуживанию

Страница: 23 / 40

--- 20 ---
(3) Removal of Gear Cover (D) [20] (Figs. 3 to 5)
Pull the Change Shaft [53] from Inner Cover (D) [52] . At this time, be careful not to lose the O-rings (1AP-10)
[13] at both sides of the Change Shaft [53] .
Secure the Armature [57] and loosen the Nut M8 [14] about two turns previously. Remove four Machine
Screws (W/Washers) M5 x 60 (Black) [66] and pull out Gear Cover (D) [20] from the main body. Remove the
Nut M8 [14] and pull out Second Shaft (E) [49] assembly. Then Second Shaft (D) [47] assembly, Counter
Weight (D) [29] , Weight Shaft (D) [30] , Rubber Spacer [28] and Sub Shaft (D) [40] can be removed from Gear
Cover (D) [20] . At this time, be careful not to lose the Rubber Spacer [28] .
Fig. 3
Secure Gear Cover (D) [20] . Remove the two Bolts M10 [16] and pull out Guide Sleeve (C) Ass'y [25] from
Gear Cover (D) [20] . Then Plunger (C) [27] and Guide Sleeve (C) Ass'y [25] can be removed together.
Remove the Swing Roller [37] and the Pin D6 [38] . Remove the two Seal Lock Screws M4 x 10 [42] from
Gear Cover (D) [20] . Remove Bearing Cover (B) [41] and the Ball Bearing 6003DDCMPS2S [39] .
Fig. 4
[52]
[54]
[53]
[13]
[13]
[62]
[20]
[28]
[29]
[30]
[66]
[14]
[15]
[49]
[40]
[47]