-15-
Reassembly can be accomplished by following the disassembly procedures in reverse. However,
particular attention should be given to the following items.
1. Mounting the Recipro Plate (F) assembly on the Second Shaft (F) (Fig. 11)
For press-fitting, use the dedicated jig (J-315). First, form the Recipro Plate (F)
[28]
assembly by attaching
the two Ball Bearings 6003VVCM (Nylon Retainer)
[29]
and Retaining Ring For D35 Hole
[30]
to the
Recipro Plate (F)
[28]
.
(a) With the Gear (F)
[32]
and Ball Bearing 608VVC2PS2L
[33]
not incorporated
As shown in Fig. 11-a, mount the Recipro Plate (F)
[28]
assembly and the Second Shaft (F)
[31]
on the
jig, and then use a press to push in the direction of the arrow.
(b) With the Gear (F)
[32]
and Ball Bearing 608VVC2PS2L
[33]
incorporated
As shown in Fig. 11-b, mount the Recipro Plate (F)
[28]
assembly and the Second Shaft (F)
[31]
on the
jig, and then use a press to push in the direction of the arrow.
When press-fitting the Recipro Plate (F)
[28]
assembly, be sure to apply pressure in the correct
direction.
Fig. 11
Fig. 11-a
Fig. 11-b
Reassembly
Recipro Plate (F)
[28]
Ball Bearing 6003VVCM
(Nylon Retainer)
[29]
Retaining Ring
For D35 Hole
[30]
Second Shaft (F)
[31]
Retaining Ring
For D35 Hole
[30]
Second Shaft (F)
[31]
Ball Bearing 6003VVCM
(Nylon Retainer)
[29]
Recipro Plate (F)
[28]
