manualshive.com logo in svg

Hitachi CP-WX4021N, Руководство пользователя и эксплуатационное руководство

Поделиться
Скачать
Hitachi CP-WX4021N Скачать руководство пользователя страница 101

92

Maintenance

►

 Before taking care of the air 

lter, make sure the power cable 

is not plugged in, then allow the projector to cool suf

ciently.

►

Use only the air 

lter of the speci

ed type. Do not use the projector without the 

air 

lter or the 

lter cover. It could result in a 

re or malfunction to the projector.

►

Clean the air 

lter periodically. If the air 

lter becomes clogged by dust or the 

like, internal temperatures rise and could cause a 

re, a burn or malfunction to 

the projector.

WARNING

• Please reset the 

lter time only when you have cleaned or replaced 

the air 

lter, for a suitable indication about the air 

lter.

• The projector may display the message such as the “CHECK THE AIR 
FLOW” or turn off the projector, to prevent the internal heat level rising.

NOTE

Cleaning and replacing the air 

lter (continued)

10.

 

Put the 

lter cover back into the place.

11.

 

Turn the projector on and reset the 

lter time using the FILTER TIME item in 

the EASY MENU.

(1)  Press the MENU button to display a menu.
(2)  Point at the FILTER TIME using the 

▲

/

▼

 cursor buttons, then press the 

►

 cursor (or the 

ENTER

 / the 

RESET

) button. A dialog will appear.

(3)  Press the 

►

 cursor button to select the “OK” on the dialog. It performs 

resetting the 

lter time.

Содержание CP-WX4021N






















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды