45
3.1 Projector Web Control - Network Settings (continued)
3. Web Control
2. Infrastructure settings
Item
Description
,3&RQ¿JXUDWLRQ
Con
¿
gures the network settings of the projector in
Infrastructure mode.
[DHCP ON]
Enables DHCP.
[DHCP OFF]
Disables DHCP.
Con
¿
gures IP Address, Subnet Mask, Default
*
ateway
and DNS ser
Y
er.
SSID
*1
Con
¿
gures the SSID of Infrastructure mode.
Encryption
Selects data encryption method.
WEP Key
Inputs the WEP key.
Either ASCII characters or hexadecimal numbers can
be used.
Howe
Y
er, a combination of both cannot be used.
Encryption
ASCII characters
HE
;
numbers
WEP 64bit
5 characters
10 characters
WEP 128bit
13 characters
26 characters
WPA Passphrase
*2
Inputs WPA Passphrase.
*1 The text length can be up to 32 alphanumeric characters and symbols. Only
symbols “
)*
,-./:
<
>
"#
[
?
]
AB^_`a
and space” can be used.
*2 The text length can be 8 to 63 alphanumeric characters and symbols. Only
symbols “
)*
,-./:
<
>
"#
[
?
]
AB^_`a
and space” can be used.
If Encryption
/
ock is ON, wireless connection is performed only when
it can be connected without changing the current settings.
The channels may
Y
ary depending on the country. In addition, depending on
the country or region, it may be re
T
uired to use a wireless network card that
conforms to the standards in the respecti
Y
e country or region.
If you connect the projector to an existing network, consult a network
administrator before setting ser
Y
er addresses.
The projector does not allow both wireless and wired
/
AN to be connected to
the same network. Do not set the same network address for both wireless and
wired
/
AN.
NOTE
