87
With using the HA
/
F-DUP
/
E
;
method, the projector can send out
254 byte data at the maximum at a time.
If it is not re
T
uired to monitor the response data from an external de
Y
ice and
the RESPONSE
/
IMIT TIME is set to OFF, the projector can recei
Y
e the data
from the computer and send it out to an external de
Y
ice continuously.
The OFF is selected as the default setting.
When the computer controls the synchroni
]
ation of receptions and transmissions,
the external de
Y
ice may not be controlled properly depending on the status of data
processing of the projector.
NOTE
NOTE
7.4.2 FULL-DUPLEX
This method lets the projector make two way communication, transmitting and
recei
Y
ing data at the same time, without monitoring response data from an
external de
Y
ice.
With using this method, the computer and an external de
Y
ice will send the data
out of synchroni
]
ation. If it is re
T
uired to synchroni
]
e them, set the computer to
make the synchroni
]
ation.
7. Network Bridge Function
7.4 Transmission method (continued)
