background image

 

 

ENGLIS

H

 

01-1)E1 

(1)(5030032724)-7.25.doc  2002/7/26  

下午

 03:17 

4. 

External parts such as cabinet. 

5. 

Products purchased outside Canada. 

6. 

Products used outside Canada. 

7. 

In transit damage claims, improper handling by carrier or post offices. 

8.  Products or parts there of which have serial numbers removed, altered or 

defaced. 

9. 

Damage defect or failure caused by, or resulting from, the operation of the unit by 
incorrect voltages. 

10.  The use of components that do not meet Hitachi specifications. 

11.  Products sold in Canada by another organization which is not authorized by 

HITACHI CANADA LTD 

12.  Picture tube damages resulting from extended exposure of the video characters. 

IMPORTANT 

: This warranty is in lieu of all other warranties, guarantees or 

agreements whether expressed or implied and no person, dealer, or Company is 
authorized to change, modify, or extend its terms in any manner whatsoever. 

Hitachi Canada Inc. shall not be responsible for any damages or loss of any kind 
attributed to the product rendered defective during usage, or attributed to 
incompatibility problems of any linked equipment including software. 

NEVER open the monitor cabinet. If the monitor is not operating properly, contact 
Hitachi Service Center. DO NOT open the monitor housing under any circumstances. 
by opening the monitor housing you will expose yourself to high voltage and possible 
severe electrical shocks, and void all warranties. 

HITACHI CANADA LTD. 

 

 

For service, please call your Dealer or your 1-800-HITACHI.

 

TRONTO 

6740 Campobello Road, Mississauga, Ont. L5N 2L8 
Tel.: (905) 821-4545 
Fax No.: (905) 821-1101

Содержание CML155XW V Plus







































Отзывы: