27
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22
ENGLISH
If ‘Color’ is selected, use ‘
Right
’ and ‘
Left
’ button to adjust its value. The range for
adjustment is from 0 to 100. ‘
Right
’ button will increase the Color setting and ‘
Left
’ will
decrease it. It will adjust the saturation of the color.
Adjustment in the “Clock/Phase” submenu
To adjust Clock and Phase settings you should follow the steps below:
1. Bring-up the OSD “
Main Menu
”.
2. Use ‘
Select
’ button to move forward to Clock/Phase icon and highlight it, this will
bring-up the “
Clock/Phase
” submenu. There are four items for your choice in this
submenu: Exit, Auto Setup, Clock and Phase.
3.
Use ‘
Right
’ and ‘
Left
’ buttons to choose the item you need and then press ‘
Select
’ to
highlight and select it.
Clock/Phase
Exit
Auto Setup
Clock
Phase
If ‘Exit’ is selected, it will exit the “
Clock/Phase
” submenu and forward to the next item
in the “
Main Menu
”. (i.e., Management icon.)
If ‘Auto Setup’ is selected, it will execute ‘Auto Setup’ function. Please refer to ‘
Auto
Setup by Direct Key
’ on page 27 for more detail information.
If ‘Clock’ is selected, then you can adjust it by ‘
Right
’ and ‘
Left
’ buttons. ‘
Right
’ button
will increase the number of pixels per line and ‘
Left
’ button will decrease the number of
pixels per line.
Note:
We recommend you do Auto Setup first. And adjusting the clock setting
only if the image looks incorrect.
If ‘Phase’ is selected, then you can adjust it by ‘
Right
’ and ‘
Left
’ buttons.
Note:
We recommend you do Auto Setup and to see whether the phase needs to
adjust or not.
