n
THE ENCLOSED POWER CORD MUST BE USED !
Failure to do so may cause electric shock hazard or fire hazard.
In USA/Canada, use a UL
or CERTIFIED power cord set
meeting the following specifications :
Rating: min.
7A , Length: max.
, Type: SVT or SJT
.
Plug type: NEMA
figure, Parallel blade, Grounding type
In Europe, a proper European standard approved power cord is to be used with this
monitor.
For a rated current up to 6 A, a type not lighter than
3G 0.75
or
3G 0.75
must be used
USE ONLY THE CORRECT VOLTAGE POWER OUTLET WITH SAFETY
GROUND CONNECTION !
100 120 V for USA, Canada, etc.
200 240 V for Europe, etc.
(This monitor will automatically adjust to the input voltage 100 120 200 240V.)
CAUTION for 200 240V operation only
This equipment relies on the protective devices in the building installation for short-circuit
and
over-current protection. Refer to the following table for the suitable number and
location of the protective devices which should be provided in the building installation.
INFORMATIVE EXAMPLES OF PROTECTIVE DEVICES IN SINGLE PHASE
EQUIPMENT OR SUB -ASSEMBLIES
Either of the two
neutral reliably identified, except for
Either of the two
Verify that the protective devices in the building installation meets the conditions in the
table prior to installing the equipment.
ENGLISH 3
