LCD Screen
Control
Switches.
Tilt Base
Cabinet \
Power
Switch
Opening
for Cables
FRONT VIEW
REAR VIEW
Install the monitor in the following way, taking care to maintain safety :
Terminal
Cover
Tilt Base
Cover
Install the monitor on a horizontal base.
Remove the “Tilt Base Cover” and the “Terminal Cover”.
First, catch the centre of upper edge of the “Tilt Base
Cover”, and tip down on this side to detach it.
Then, seize the centre of bottom edge of the “Terminal
Cover”, and turn it behind to detach it.
Use video signal cable which is included in the carton
box. (Cable model name:HD-0501 FXL)
For computer use , insert the connector of a signal cable
to the “ANALOG” terminal of the monitor, with attention
to the suitability, and secure the screws on the
“ANALOG” terminal shell firmly. And draw the cable
around by guides.
1
Red Video
2
Green Video (Sync. optional)
3
Blue Video
ENGLISH 7
