-12-
• Throttle rod and choke button
• Firmly fit the protrusion of the inner surface of the Carburetor Insulator
[149]
into the groove of
the Cylinder
[146]
when mounting the Carburetor Insulator
[149]
on the Cylinder
[146]
.
• Fit the Insulator Clip
[147]
into the groove of the Carburetor Insulator
[149]
when reassembling the
clip.
[135]
[191]
[192]
[134]
[151]
Throttle valve
Choke valve
[192]
Apply 0.1 to 0.2 g of Alvania Grease RL3 to the sliding portions
of the Choke Button
[191]
and Choke Rod Rubber
[192]
.
NOTE: Orient the Choke Button [191] and
Choke Rod Rubber [192] correctly.
Fit Cleaner Box (A)
[189
] to the slit portion
when mounting Cleaner Box (A)
[189]
.
18±2
