![background image](http://html.mh-extra.com/html/hitachi/cm-75eap/cm-75eap_service-manual_140826011.webp)
-10-
• Shield cover
•
Recoil starter
• Align the line of the Shield Cover
[25]
to ±0.5 mm from the top of the Cylinder Cover
[136]
when
inserting the plug cap and Shield Cover
[25]
into the Spark Plug Ass'y BPMR7A
[142]
.
• Put the Cord
[21]
in the pawls of the Fan Guide
[7]
for reassembly.
• Put the high-voltage cord of the Ignition Coil Ass'y
[23]
in the groove of the Cylinder Cover
[136]
and
Fan Guide
[7]
for reassembly.
• Do not get any other part caught between the cord terminal and the terminal retaining rib of the Fan
Guide
[7]
.
• For easier reassembly of the Recoil Starter
[8]
, put the Recoil Starter
[8]
on its mounting position, pull
the starter handle, and then return it into position.
1. Put the plug cap on the Shield Cover
[25]
and fold the Shield Cover
[25]
into two.
[25]
Bend here.
Plug cap
2. Bend and caulk five tabs of the Shield Cover
[25]
by using the long-nose pliers.
3. Mount the Shield Cover Ring
[26]
by using
long-nose pliers.
[26]
• Shield cover mounting method
Caulk here.
Top of the Cylinder Cover
[136]
[25]
Align the line of the Shield Cover
[25]
to ±0.5 mm
from the top of the Cylinder Cover
[136]
.
[136]
[6]
[7]
[8]
[10]
[45]
[9]