-2-
Equipped with lightweight and high-capacity (3.0 Ah) slide-type
lithium-ion battery
The type BSL 1430 lithium-ion battery is equipped with the overdischarge protection circuit, overload
protection circuit, and voltage monitoring circuit for each cell to prevent shortening of the battery life due to
overdischarge (overuse) or overcharge (excessive charging) of the battery.
The number of charging/discharging is about 1,500.
Precautions for use of the Type BSL 1430 lithium-ion battery
The type BSL 1430 lithium-ion battery is equipped with a protective function that automatically stops output
to extend the battery life. The motor may stop automatically in either of the following case (a) or (b) even if
the switch is depressed continuously during operation. This is because the protective function is activated.
The battery is not faulty.
(a) The motor automatically stops when the remaining battery level is low (when the battery voltage is
decreased to about 8 V. Charge the battery immediately in such case.
(b) The motor may stop if the Model CJ 14DSL is overloaded. In such case, release the switch and
eliminate the cause of the overload problem. Then the Model CJ 14DSL will be operable.
Please instruct the customers on the above precautions.
Tool-less blade changing system
The blade can be easily changed by opening/closing the lever. Usable blade is only the BOSCH's blade
whose thickness at the attaching portion is 1.5 mm or less or an equivalent blade having the same shape.
1) Open the lever fully. (Fig. )
2) Detach the blade from the blade holder.
3) Attach the new blade in the blade holder by pushing as far
as it will go. (Fig.
)
4) Close the lever. (Fig. )
LED lighting system
The Model CJ 14DSL is equipped with an LED light for illuminating the blade. To turn on the light, pull the
trigger. Release the trigger to turn off.
Powerful dust blowing
The Model CJ 14DSL is equipped with a dust blower mechanism that blows off dust by the air from the
motor cooling fan.
4-stage orbital action
The Model CJ 14DSL is equipped with the orbital mechanism that allows the blade to move up and down
and forward and backward. This mechanism makes the blade dig well into wood and other soft materials
and also discharges cutting chips well to achieve speedy cutting. For details, refer to “Blade movement” on
page 7.
Soft grip handle
The handle of the Model CJ 14DSL is widely covered with soft-touch elastomer (rubber-like soft resin). It is
slip-resistant and securely fits in the palm of a hand even if the gripping hand sweats.
Lever
Blade holder
Blade
