Hitachi CJ 14DSL, Технические данные и руководство по обслуживанию

Страница: 21 / 27

-18-
Screw tightening torque
Checking after reassembly
No-load current
Apply 20 g of Shell Albania (RL3) grease to the following parts.
•
Pinion of the Motor DC 14.4 V
[17]
• Tooth flanks and outer circumference of the shank of the Gear
[31]
• Sliding section of the Balance Weight
[32]
(including the inner surface of the oval hole)
• Sliding section of the Orbital Cam
[33]
(including the inner surface of the oval hole)
• Sliding section of Washer (A)
[34]
• Sliding section of Plunger Holder (A)
[26]
Apply 10 g of Molub-Alloy (777-1) grease to the inner and outer circumferences of the Connecting Piece
[29]
.
Apply 2 g of grease (BC-4) to the sliding section of the Plunger
[27]
and the sliding section and the inside of
the Plate Spring
[25]
.
• Tapping Screw (W/Flange) D4 x 20 (Black)
[6]
------------------------------- : 2.0
±
0.5 N ٠ m (20
±
5 kgf ٠ cm)
• Tapping Screw (W/Sp. Washer) D3 x 8
[9]
------------------------------------- : 1.5
±
0.4 N ٠ m (15
±
4 kgf ٠ cm)
• Lever Bolt
[20]
------------------------------------------------------------------------- : 2.5
±
0.5 N ٠ m (25
±
5 kgf ٠ cm)
• Seal Lock Hex. Socket Hd. Bolt M3 x 8
[21]
----------------------------------- : 2.5
±
0.5 N ٠ m (25
±
5 kgf ٠ cm)
• Seal Lock Hex. Socket Hd. Bolt M3 x 6
[22]
----------------------------------- : 2.5
±
0.5 N ٠ m (25
±
5 kgf ٠ cm)
• Machine Screw (W/Washer) M4 x 8 (Black)
[43]
----------------------------- : 2.0
±
0.5 N ٠ m (20
±
4 kgf ٠ cm)
• Hex. Socket Hd. Bolt M5 x 14
[50]
----------------------------------------------- : 3.9 to 5.8 N ٠ m (40 to 60 kgf ٠ cm)
Check the following after reassembly.
(1) Check that the switching operation of the DC-Speed Control Switch
[4]
and the Pushing Button
[3]
is
smooth.
(2) Check that the LED
[2]
lights by depressing the trigger of the DC-Speed Control Switch
[4]
.
(3) Check that the stroke speed changes depending on the depressing amount of the trigger of the DC-
Speed Control Switch
[4]
.
(4) Check that the blade can be attached securely.
(5) Check that the remaining battery indicator lamp lights by pressing the remaining battery indicator switch
and goes off by releasing your finger from the remaining battery indicator switch.
No-load current: 6.6 A or lower (14.4 V)
Application of lubricant