-13-
3. Disassembly of housing (A).(B) set
(1) Remove the Guard Bar
[7]
.
(2) Loosen the eight Tapping Screws (W/Flange) D4 x 20 (Black)
[6]
and open the housing.
(3) Remove the Plate Spring
[25]
from the housing.
(4) Loosen the Tapping Screw (W/Sp. Washer) D3 x 8
[9]
and remove the Fence
[8]
from the housing.
(5) The other housing can then be removed from the main body. After disassembly, remove the two
O-rings (P-6)
[5]
from both sides of the housing.
4. Removal of the plunger and the blade holder
(1) Pull out the Pin D6
[24]
from the Gear Holder
[35]
, and remove the Plunger
[27]
and Plunger Holder (A)
[26]
.
(2) Loosen the Seal Lock Hex. Socket Hd. Bolt M3 x 6
[22]
and the Seal Lock Hex. Socket Hd. Bolt M3 x 8
[21]
, and remove the Blade Holder
[23]
.
(3) Pull out the Packing Cover
[38]
, Packing
[39]
and Plunger Holder (B)
[37]
from the Plunger
[27]
.
• Removal of the housing
Tapping Screw (W/Sp. Washer) D3 x 8
[9]
Fence
[8]
Tapping Screw (W/Flange)
D4 x 20
[6]
O-ring (P-6)
[5]
Plate Spring
[25]
Housing (A). (B) set
[1]
Guard Bar
[7]
• Removal of the plunger and the blade holder
Plunger Holder (A)
[26]
Pin D6
[24]
Seal Lock Hex. Socket Hd. Bolt
M3 x 8
[21]
Seal Lock Hex. Socket Hd. Bolt
M3 x 6
[22]
Blade Holder
[23]
Packing Cover
[38]
Plunger Holder (B)
[37]
Packing
[39]
Plunger
[27]
Gear Holder
[35]
