Hitachi C2144S, Инструкция по эксплуатации

Страница: 10 / 18

GB - 9 -
Selecting Mode
• Using “ “ or “ ” button select Mode.
• Press “ ” or “ ” button to change Mode.
You can choose
MONO , STEREO or DUAL (I-II) mode, only if the
selected channel supports that mode.
You can also change sound mode directly pressing “
I-II ” but-
ton on your remote control.
ÿþýüûú
ýú
úú
þú
ûþú
ÿý
úüýú
ûþþ
þ
þ
In case of bilingual broadcast (Dual Sound), you can select
original or dubbed language using mode option.
Setting AVL
Automatic Volume Limiting (AVL) function normalises sound
to obtain fixed output level between programs, having different
sound levels. Pressing “ ” or “ ” button will turn on and off
this feature.
ÿþýüûú
ýú
úú
þú
ûþú
ÿý
úüýú
ûþþ
þ
þ
Setting Effect
You can use this feature to switch the sound effect on and off.
Pressing “ ” or “ ” button will turn on and off this feature. If the
current sound system is
MONO and the sound effect is set ON ,
then the sound will be heard as if it is STEREO . If the current
sound system is STEREO , switching this effect on will make
the sound deeper. Switching it off will make no change in
MONO and STEREO .
ÿþýüûú
ýú
úú
þú
ûþú
ÿý
úüýú
ûþþ
þ
þ
Equalizer
To enter Equalizer sub-menu, select Equalizer using “ “ or “ ”
button, then enter Equalizer menu pressing “ ” or “ ” button.
ÿþýüûú
ýú
úú
þú
ûþú
ÿý
úüýú
ûþþ
þ
þ
In MODE item there are five predefined and one user defined
options. These are
USER, CLASSIC, JAZZ, ROCK, POP and
FLAT . The predefined options can not be changed by the user.
If you change one of the frequency values of the predefined
options, the MODE is switched automatically to USER option.
The USER option may be adjusted by the user.
The 5 items below the MODE are available to adjust the sound
settings in 5 frequency values: 120 Hz, 500 Hz, 1.5 kHz, 5 kHz
and 10 kHz. To change the values of 5 frequency options,
select one of the options by “ “ or “ ” button, and then press
“ ” to increase the value, or “ ” to decrease the value. In mid
position, cursor is displayed with the two reciprocal arrows.
To store the Equalizer settings, press “ ” or “ ” button on
“
STORE ” option.
During the store process all the items are stored, moreover,
the USER mode information would not be lost. In other words,
when the user mode is selected again, after storing the MODE
with one of the predefined options, the user definde frequency
values would be set.
To Store the Settings
• Press “ ” or “ ” button on “ STORE ” option to store Sound
menu settings.
ÿþýüûú
ýú
úú
þú
ûþú
ÿý
úüýú
ûþþ
þ
þ
Picture Menu
• To enter the Picture menu directly, press the “ GREEN ” button,
or
• Press " " button, now you are in Main menu. In the Main
menu, select “ PICTURE ” using “ “ or “ ” button, then enter
the Picture menu pressing “ ” or “ ” button.
Setting Brightness
• As you enter the picture menu, Brightness will be the first
selected option.
• Press “ ” button to increase brightness.
• Press “ ” button to decrease brightness.
þúùø÷üýÿûû
ýüú ûü
ú
û÷ ú ýÿûû
ÿ
ûü úÿ