Hitachi C 10FSB, Технические данные и руководство по обслуживанию

Страница: 9 / 97

--- 5 ---
Height (H)
Table 5
Width (W)
Workpiece
Left 45˚
Right 57˚ (Hitachi)
Right 52˚ (C)
Fig. 7
Unit: mm (inch)
Maker
Model
Max.
cutting
dimension
HITACHI
C 10FSH
C 10FSB
Right and left 45˚
Height x Width
(H x W)
Right 57˚ (Hitachi)
Right 52˚ (C)
Height x Width
(H x W)
85 x 218 (3-11/32" x 8-19/32")
90 x 190 (3-9/16" x 5-25/32")
with aux. board width 15 (19/32")
85 x 165 (3-11/32" x 6-1/2")
90 x 147 (3-9/16" x 5-25/32")
with aux. board width 10 (13/32")
HITACHI
C 10FS
85 x 220 (3-11/32" x 8-15/32")
90 x 215 (3-9/16" x 8-15/32")
85 x 180 (3-11/32" x 7-3/32")
90 x 165 (3-9/16" x 6-1/2")
with aux. board width 10 (19/32")
C
91 x 216
(3-19/32" x 8-1/2")
91 x 185
(3-19/32" x 7-9/32")
Table 6
Unit: mm (inch)
Maker
Model
Max.
cutting
dimension
HITACHI
C 10FSH
C 10FSB
Left 45˚
Height x Width
(H x W)
Right 45˚
Height x Width
(H x W)
55 x 305 (2-3/16" x 12")
60 x 280 (2-3/8" x 11")
with aux. board width 15 (19/32")
30 x 305 (1-3/16" x 12")
35 x 280 (1-3/8" x 11")
with aux. board width 15 (19/32")
HITACHI
C 10FS
55 x 305 (2-3/16" x 12")
60 x 295 (2-3/8" x 11-19/32")
30 x 305 (1-3/16" x 12")
35 x 295 (1-3/8" x 11-19/32")
C
50 x 305
(1-31/32" x 12")
31 x 305
(1-7/32" x 12")
Example of bevel
cutting application
Width (W)
Right 45˚
Height (H)
Workpiece
Fig. 8 Fig. 9
Left 45˚
(8) Miter cutting
* C cannot perform miter cutting more than 52˚.
Wide workpieces as wide as shown in Table 5 can be cut by
swiveling the turn table (right and left).
The maximum cutting dimensions in [ ] in Table 5 are those
obtained by adjusting the lower limit position of the saw blade
indicated in Fig. 5-2, also with an auxiliary board.
(9) Right and left bevel cutting
Maximum cutting dimension
Workpieces as wide as shown in Table 6 can be bevel-cut by tilting the saw blade (right and left).
* These numeric values are for the models destined for the U.S.A. and Canada.
Refer to "5. SPECIFICATIONS" as the capacities are different depending on the destinations.
* These numeric values are for the models destined for the U.S.A. and Canada.
Refer to "5. SPECIFICATIONS" as the capacities are different depending on the
destinations.