Hitachi C 10FSB, Технические данные и руководство по обслуживанию

Страница: 34 / 97

--- 30 ---
(3) Setting to cut crown moldings at positions and in Fig. 39 (See Fig. 45, tilt the head to the right.):
Turn the turn table to the right and set the miter angle as follows:
For 45˚ type crown moldings: 35.3˚ ( mark)
For 38˚ type crown moldings: 31.6˚ ( mark)
Tilt the head to the right and set the bevel angle as follows:
For 45˚ type crown moldings: 30˚ ( mark)
For 38˚ type crown moldings: 33.9˚ ( mark)
Position the crown molding so that the upper surface ( in Fig. 38) contacts the fence as indicated in
Fig. 47 .
(4) Setting to cut crown moldings at positions and in Fig. 39 (See Fig. 46, tilt the head to the right.):
Turn the turn table to the left and set the miter angle as follows:
For 45˚ type crown moldings: 35.3˚ ( mark)
For 38˚ type crown moldings: 31.6˚ ( mark)
Tilt the head to the right and set the bevel angle as follows:
For 45˚ type crown moldings: 30˚ ( mark)
For 38˚ type crown moldings: 33.9˚ ( mark)
Position the crown molding so that the lower surface ( in Fig. 38) contacts the fence as indicated in
Fig. 48.
1 4
2
3
1
2 3
A
B
Fig. 45 Fig. 46
Fig. 47 Fig. 48
Fence
Table on base
Table on base
Fence
Fence
Base
Turn table
Bevel angle scale
Miter angle scale
1
1
4
Fence
3
3
2
2
Bevel angle scale
Base
Miter angle scale
Turn table
A
B
B
A