Hitachi C 10FSB, Технические данные и руководство по обслуживанию

Страница: 8 / 97

--- 4 ---
85 x 312
(3-11/32" x 12-9/32")
90 x 280
(3-9/16" x 11")
with aux. board
width 15 (19/32")
Fig. 5-2
Saw blade
90 mm
(3-9/16")
Auxiliary
board
Gap 2 to 3 mm
Fig. 5-1
A 15 mm (19/32")-wide auxiliary board
is required to ensure full-width cutting.
Top surface
of turn table
Head bottom surface
Head bottom surface
Workpiece
85 mm
(3-11/32")
Top surface
of turn table
Fence
Workpiece
(6) Slide cutting
Fig. 4
Workpiece
Maker
Model
Max.
cutting
dimension
HITACHI
C 10FSH
C 10FSB
Height x Width
(H x W)
Table 3
Unit: mm (inch)
Height (H)
Width (W)
Fence
280 mm (11")
Workpiece
Height (H)
Width (W)
Fig. 6
HITACHI
C 10FS
85 x 312
(3-11/32" x 12-9/32")
90 x 295
(3-9/16" x 11-19/32")
C
91 x 305
(3-19/32" x 12")
85 x 85
(3-11/32" x 3-11/32")
90 x 90
(3-9/16" x 3-9/16")
with aux. board
width 15 (19/32")
Maker
Model
Max.
cutting
dimension
HITACHI
C 10FSH
C 10FSB
Height x Width
(H x W)
Table 4 Unit: mm (inch)
HITACHI
C 10FS
85 x 85
(3-11/32" x 3-11/32")
90 x 90
(3-9/16" x 3-9/16")
C
91 x 91
(3-19/32" x
3-19/32")
Workpieces as wide as shown in Table 1 can be cut
with the motor head sliding. The lower limit position
of the saw blade is factory-adjusted so that
workpieces up to 85 mm (3-11/32") high and
312 mm (12-9/32") wide can be cut as shown in
Fig. 5-1. When cutting a workpiece of 90 mm
(3-9/16") in height as indicated in [ ] in Table 3,
adjust the saw so that there is a clearance of 2 to 3
mm (3/32" to 1/8") between the bottom surface of
the head and the top surface of the workpiece at
the lower limit position of the saw blade as shown
in Fig. 5-2. (See the Instruction Manual,
page 14 "4. Lower limit position of saw blade when
cutting a large workpiece".)
Please note that, when cutting in this position, it is
necessary to use an auxiliary board of 15 mm
(19/32") wide so that the workpiece on the fence
side can be cut full width.
(7) Press cutting
Press cutting with the head swiveling enables cutting square workpieces as large as shown in Table 4 in a
single sawing operation. It is convenient for cutting narrow workpieces (Fig. 6).
312 mm (12-9/32")
* These numeric values are for the models destined for the U.S.A. and Canada.
Refer to "5. SPECIFICATIONS" as the capacities are different depending on the destinations.
* These numeric values are for the models destined for the U.S.A. and Canada.
Refer to "5. SPECIFICATIONS" as the capacities are different depending on the destinations.