69
Ot
h
e
r S
e
tt
in
g
s
En
g
lish
Disabling the Tangle-Free Finish function after spin operations
This function untangles laundry (for 2 to 4 minutes) after the spin cycle of [WASH] operations.
(This does not operate in the [SOFT], [BLANKET], [DELICATE], [WASH DRY], [DRY], and [CLEAN]
programs.) The remaining time indicator blinks during Tangle-Free Finish operations.
To change the default setting
Press
to turn on the power.
The setting changes as follows each time the button
is held for 3 seconds.
On (default setting)
Off
(The Tangle-Free Finish function
is disabled.)
Hold the
button for at least 3 seconds.
Press
to turn off the power.
z
This setting will be saved.
To change the setting, perform the same operation.
z
The Tangle-Free Finish function may not operate for large wash loads (6 k
g
or more).
z
The Tangle-Free Finish function will not operate for operations that do not include the wash cycle.
Maintaining softness after drying operations (Soft Guard)
This function continues drum rotation until you remove the laundry to maintain softness after
drying operations.
The door is locked during Soft Guard operations, so press the [PAUSE] button before opening
the door. (This function does not operate in the [BLANKET], [STATIC DRY], [DEODORANT], and
[FUZZY (10 MIN)] programs.)
Soft Guard operation
The function operates for about 2 hours, rotating the drum for 12 seconds every
5 minutes.
You can release the door lock by pressing the [PAUSE] button.
Alternates between
pause and drum rotation
About 5 min
About 12 sec
About 2 hr
The remaining time indicator blinks
“000” during Soft Guard operation,
and
is lit.
Operation finish sound
(melody or buzzer)
Soft Guard operation
Pause
Drum rotation
To change the default setting
Press
to turn on the power.
The setting changes as follows each time the button
is held for 3 seconds (the beep length indicates the
setting).
On
Off (default
setting)
Short beep sound
Long beep sound
Hold the
button for at least 3 seconds.
Press
to turn off the power.
z
This setting will be saved.
To change the setting, perform the same operation.