manualshive.com logo in svg

Hitachi 5000 Series, Руководство по оборудованию

Поделиться
Скачать
Hitachi 5000 Series Скачать руководство пользователя страница 66

Item

Condition

Operating

Not operating

Shipping and storage

■

DBF3: L

pAm

 60dB,

L

wA

 6.0Bel

■

DBN: L

pAm

 60dB,

L

wA

 6.0Bel

1. Fire suppression systems and acoustic noise: Hitachi does not test storage systems and hard

disk drives for compatibility with fire suppression systems and pneumatic sirens. Hitachi also

does not provide recommendations or claim compatibility with any fire suppression systems

and pneumatic sirens. Customer is responsible to follow their local or national regulations.

2. See ANSI/ISA-71.04-2013 Environmental Conditions for Process Measurement and Control

Systems: Airborne Contaminants.

3. Meets the highest allowable temperature conditions and complies with ASHRAE (American

Society of Heating, Refrigerating and Air-Conditioning Engineers) 2011 Thermal Guidelines

Class A2. The maximum value of the ambient temperature and the altitude is from 35

degrees C at an altitude of 950 meters (3000 feet) to 28 degrees C at an altitude of 3050

meters (10000 feet). The allowable ambient temperature is decreased by 1 degree C for every

300-meter increase in altitude above 950 meters.

4. The acoustic level is measured under the following conditions in accordance with ISO7779

and the value is declared based on ISO9296.
In a normal installation area (data center/general office), the storage system is surrounded by

different elements from the following measuring conditions according to ISO, such as noise

sources other than the storage system (other devices) , the walls and ceilings that reflect the

sound.
Therefore, the values described in the table do not guarantee the acoustic level in the actual

installation area.

■

Measurement environment: In a semi-anechoic room whose ambient temperature is 23

degrees C ± 2 degrees C

■

Device installation position: The Controller Chassis is at the bottom of the rack and the

Drive Box is at a height of 1.5 meters in the rack

■

Measurement position: 1 meter away from the front, rear, left, or right side of the storage

system and 1.5 meters high (at four points)

■

Measurement value: Energy average value of the four points (front, rear, left, and right)

5. Sound pressure level [LA] changes from 45 dB to 63 dB according to the ambient

temperature, drive configuration and operating status. The maximum could be 67 dB during

maintenance procedure for failed ENC or Power Supply.

6. NVMe drives have a temperature range from 10 ºC to 35 ºC while in operation.

Environmental specifications

Chapter 3: Specifications

Hitachi Virtual Storage Platform 5000 Series Hardware Guide

66

Содержание 5000 Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды